Manual
The customizable 4-part formula enables precise feeding schedules for everything from lush leafy greens to robust fruiting vegetables—delivering results so impressive it feels like magic. And water-soluble powder offers more coverage than liquid fertilizers — just mix with water to create multiple gallons of nutrient solution.
- Plant Mana 1 (PM-1): Promotes healthy leaves & strong roots.
- Plant Mana 2 (PM-2): Supports leaf health & calcium delivery.
- Plant Mana 3 (PM-3): Maximizes strength & final development.
- Plant Mana ES (PM-ES): Optimized for micronutrient uptake.
- Keep out of reach of children.
- May be harmful if swallowed or inhaled.
- May cause irritation. Avoid contact with eyes, skin and clothing.
- Wash skin & clothing thoroughly after handling.
Plant Mana Density
| Name | g/ml (grams per milliliter) | g | ml |
|---|---|---|---|
| PM-1 | 1.06 | 106 | 100 |
| PM-2 | 1.1 | 110 | 100 |
| PM-3 | 1.26 | 126 | 100 |
| PM-ES | 1.06 | 106 | 100 |
Plant Mana Schedule
This table indicates the required dosage of Plant Mana nutrients to achieve a target EC value in one gallon of water.
Specifically, during the sprouting stage, you need to add 1.8 ml of PM-1 and 1.3 ml of PM-2 to each gallon of water to achieve an EC level estimated of 1.1.
| Water (1 gallon) | Sprouting | Early Vegetation | Peak Vegetation | Flowering / Fruiting |
|---|---|---|---|---|
| PM-1 (ml) | 1.8 | 3.7 | 4.5 | 2.2 |
| PM-2 (ml) | 1.3 | 2.5 | 3.2 | 2.7 |
| PM-3 (ml) | 0 | 0 | 0 | 2.9 |
| PM-ES (ml) | 0 | 0.5 | 0.8 | 0.8 |
| EC level estimated | 1.1 | 2.3 | 2.7 | 2.8 |
Mixing Instruction
-
Add nutrients one at a time： Do not pour multiple different Plant Mana nutrients into the same container at once. Before they are fully dissolved, high concentrations of different elements may react and form insoluble salts, reducing the effectiveness of your hydroponic solution.
-
Layer-by-layer addition： If possible, add each type of Plant Mana to a different layer of the Grow Kit. This prevents premature mixing at high concentrations.
-
Use the pump to assist mixing： If you need to add another nutrient to the same container, first switch on the water pump and let it run for at least 20 minutes. This ensures the first nutrient is fully circulated and diluted before introducing the next one.
Applicable only to Elfsys Grow kit
If your Elfsys Grow Kit has not been filled with water yet, that is, full refill from empty, then you can refer to this table.
- 2 Layers
- 3 Layers
- 4 Layers
2 Layers (full refill from empty, need 6.8 gallons)
| Water (6.8 gallons) | Sprouting | Early Vegetation | Peak Vegetation | Flowering / Fruiting |
|---|---|---|---|---|
| PM-1 (ml) | 11.5 | 23.7 | 28.9 | 14.1 |
| PM-2 (ml) | 8.0 | 15.5 | 19.8 | 16.7 |
| PM-3 (ml) | 0 | 0 | 0 | 15.7 |
| PM-ES (ml) | 0 | 3.2 | 5.1 | 5.1 |
| EC level estimated | 1.1 | 2.3 | 2.7 | 2.8 |
3 Layers (full refill from empty, need 8.7 gallons)
| Water (8.7 gallons) | Sprouting | Early Vegetation | Peak Vegetation | Flowering / Fruiting |
|---|---|---|---|---|
| PM-1 (ml) | 14.8 | 30.4 | 36.9 | 18.1 |
| PM-2 (ml) | 10.3 | 19.8 | 25.3 | 21.4 |
| PM-3 (ml) | 0 | 0 | 0 | 20 |
| PM-ES (ml) | 0 | 4.1 | 6.6 | 6.6 |
| EC level estimated | 1.1 | 2.3 | 2.7 | 2.8 |
4 Layers (full refill from empty, need 10.6 gallons)
| Water (10.6 gallons) | Sprouting | Early Vegetation | Peak Vegetation | Flowering / Fruiting |
|---|---|---|---|---|
| PM-1 (ml) | 18.0 | 37.0 | 45.0 | 22.0 |
| PM-2 (ml) | 12.5 | 24.1 | 30.8 | 26.0 |
| PM-3 (ml) | 0 | 0 | 0 | 24.4 |
| PM-ES (ml) | 0 | 5.0 | 8.0 | 8.0 |
| EC level estimated | 1.1 | 2.3 | 2.7 | 2.8 |
If your primary grow container is running low, that is, refill from lowest to highest line, then you will need 5 gallons of water.
| Water (5 gallons) | Sprouting | Early Vegetation | Peak Vegetation | Flowering / Fruiting |
|---|---|---|---|---|
| PM-1 (ml) | 8.5 | 17.5 | 21.2 | 11.0 |
| PM-2 (ml) | 5.9 | 11.4 | 14.5 | 13.5 |
| PM-3 (ml) | 0 | 0 | 0 | 14.5 |
| PM-ES (ml) | 0 | 2.4 | 3.8 | 3.8 |
| EC level estimated | 1.1 | 2.3 | 2.7 | 2.8 |